Please use this identifier to cite or link to this item: http://localhost:8080/xmlui/handle/123456789/7089
Full metadata record
DC FieldValueLanguage
dc.contributor.authorS. Obaid, Ahmed-
dc.date.accessioned2022-10-26T21:59:26Z-
dc.date.available2022-10-26T21:59:26Z-
dc.date.issued2012-06-27-
dc.identifier.urihttp://localhost:8080/xmlui/handle/123456789/7089-
dc.description.abstractThe present paper reports the preparation of a solar cell which has a cross-sectional scheme: ITO/CdS/PbS, containing a commercially transparent conductive ITO; chemically deposited n-type CdS (340 nm) and absorbed layer of p-type PbS (1400 nm). The structural and optical properties of the constituent films are presented. X-ray diffraction showed that all of the thin films are polycrystalline. Using scanning electron microscopy, the present study revealed that the films have uniform surface morphology over the substrate. The solar cell was characterized by determining the open circuit voltage, short-circuit current density, and J–V under 40 mW/cm2 solar radiation. The efficiency of the solar cells was 1.35%, which is much higher (0.041, 0.5 and 0.1–0.4%) and slightly smaller (1.65%) than some solar cells reported in the literature.en_US
dc.publisherSuperlattices and Microstructuresen_US
dc.subject"PbS; Nanocrystalline thin films ;Microwave-assisted CBD "en_US
dc.titlePreparation of chemically deposited thin films of CdS/PbS solar cellen_US
Appears in Collections:قسم الفيزياء

Files in This Item:
File Description SizeFormat 
Preparation of chemically deposited thin films of CdS PbS solar cell - Ahmed Obaid.pdf415.25 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.